Scratch Hardness Tester Motorised
MY Q Scratch Hardness Tester Motorised is a unique test instrument to determine the resistance to scratch under a specified load. Tests are conducted either on a go/no go basic by testing at a single specified load on the diamond stylus tip or by increasing loads to determine the minimum load at which the coating is penetrated. MY Q Scratch Hardness Tester is designed as per standard ASTM G171-03. Automobile’s testing instruments
Scratch Hardness Tester HO
MY Q Scratch Hardness Tester is a unique test instrument to determine the resistance to scratch under a specified load. Tests are conducted either on a go/no go basic by testing at a single specified load on the Diamond Stylus tip or by increasing loads to determine the minimum load at which the coating is penetrated. MY Q
Scratch Hardness Tester is designed as per standard ASTM G171-03. Automobile’s testing instruments
Humidity Tester Chambers
MY Q Polymer materials are usually get damaged due to the natural environmental factors which form due to the atmosphere and earth’s surface when it is used for years outdoor which directly affect the life of the products. In order to measure the actual life of the polymers when placed years outside, Presto offers various environmental testing equipment to create natural climatic conditions of different types. These instrument helps to study the weather resistance of products when place under the different weather in the laboratory. It is the highly cost-effective method which is widely used to measure the quality of the polymers. Automobile’s testing instruments
Hot Air Oven
MY Q My Q HOT AIR OVEN Determination of effect of ageing on various physical properties of different materials may be carried out, by heating the material under test ,inside the oven as temperature required so that the effects of long – term ageing are reproduced within a much shorter duration of time
Cupping Machine
My Q Cupping Machine is a consistent tool useful for determining the draw ability of sheet metal components and non-ferrous metal sheets. Accurate and reliable testing of adhesion, hardness, porosity of coatings of paints or varnish in metal sheets, strips etc. in sheet metal, metallurgy, rubber industry. MY Q Cupping Machine is designed as per standards IS: 10175 (Part I); 1993 & ISO 8490: 1986, ISO 1520:2006. Automobile’s testing instruments
Vibration Table Computerised
My Q Vibration Table is a consistent tool for checking road worthiness of packages. It simulates the vibrations and jolts subjected to various packages and products during handling and transportation. MY Q Vibration Table is manufactured under various Test Standards ASTM D999, TAPPI T-17, IS 7028(part II).
Available in Electro-mechanical, Pneumatic and Electromagnetic models also. Automobile’s testing instruments
Hot Water Bath – Digital
My Q Water Bath Digital is a unique test cabinet designed to detect the change in the physical characteristics of material and to ascertain the actual working life of test samples at elevated temperature. Available in Digital PID Temperature Control Models with Timer facility (optional) with various capacities. Automobile’s testing instruments
Tensile Strenght Tester
My Q Ultra-Low Deep Freezer Prima is a unique test cabinet designed to create temperature inside the chamber to detect the change in the physical characteristics of material and to ascertain the actual working life of testing device.
• Temperature control through PT-100 sensor
• Highly accurate test results under uniform cooling temperatures in the chamber
• High Grade imported Puf insulation
• Maximum Thermal Efficiency by insulation means.
• HMI based touch screen display
USB port to data record. Automobile’s testing instruments
Impact Resistance Tester For Paints – Indirect
MY Q Impact Resistance Tester for Paints – Indirect is a consistent tool useful for testing on coatings for crack formation; breaking off; adhesion and elasticity. A bulge is formed in the sheet metal by a falling weight with a hemispherical end. MY Q Impact Resistance Tester for Paints – Indirect is designed as per Standards : ASTM D2794-93(2010), ISO 6272-1:2011. Automobile’s testing instruments
Drop Tester Motorised Pneumatic
MY Q Drop Tester is motorised single wing structure, suitable for package dropping impact endurance test, such as carton and
electric equipment. By testing with falling down with this drop testing machine, we can be sure about the goods safety when being delivered. Automobile’s testing instruments
Drop Tester Manually
MY Q Drop tester is a reliable instrument that can be used for analyzing the ability of the packaging containers to withstand the
drops faced by them during transit and shipping (As per IS:7028 Pt IV). Provision with angular drop arrangement to ascertain
the transport worthiness of the package from all angles. Suitable for Boxes, Jerry cans . Automobile’s testing instruments
Haze Meter
MY Q Bench UV Accelerated Weathering Tester is a consistent tool that reproduces and is useful for checking the damage caused by sunlight, rain and dew. This instrument provides simulation of accelerated ageing and designed to assess the ability of molded/extruded rubber products to various environmental factors by using UV lamps, water spray and fluorescent lights. MY Q UV Accelerated Weathering tester is manufactured under various standards ISO 4892-3:2012, ASTM D4329-13, ASTM D4587-11, and ASTM G-151-10. Plastic testing instruments
