Absorption & Desorption Tester
My Q This Insole / Insock Absorption And Desorption Tester is used to determine the water absorption and desorption of insole and insock for various shoes. The specimen, placed onto a wet base plate, is submitted to repeated flexing during under a given pressure (in the same manner as the insole of a shoe during working)
Bally Flexometer
My Q Bally Flexing Tester (Flexometer) is designed for flexing resistance test to bending or other types of
failure at flexing creases.
The Flexometer is applicable to all flexible materials, in particular leathers, artificial leather below thickness of 3.0mm, and other coated fabrics, sheet materials, etc.
Circular Rubbing Fastness Tester
My Q Circular Rubbing Color Fastness Tester is used for assess colored materials friction damage and surface color transfer. It is suitable test the upper materials, such as leather, plastics and fabric etc.
Ross Flex Tester
My Q The ability of shoe sole with stand repeated bending experienced during walking without developing a crack within the estimated life span of the shoe is a very important factor for determining its quality. Also, its ability to withstand propagation of any slit formed due to a sharp edge pointed object piercing it during walking is equally important in assessing its quality. These abilities of any sole can be evaluated with the help of a Ross Flex Tester.
Compression Resistance Tester
My Q Safety / protective footwear should give safety to the toe of the user under
compression load and to the sole against nail penetration. Compression resistance is determined by subjecting the footwear to a specified
compression load and measuring the clearance with the help of a modeling clay cylinder. Nail penetration resistance is measured by measuring maximum force required for a nail to penetrate through the sole.
De Mettia Flex Tester
My Q De-Mattia Flex Tester has 6 set of grips to hold test specimens in two tiers with their holding faces lying in the same vertical plane. Holding one end of the test specimen in a fixed grip and the other end in a reciprocating grip provides the flexing and unflexing action.
De Mettia Flex Tester
My Q De-Mattia Flex Tester has 6 set of grips to hold test specimens in two tiers with their holding faces lying in the same vertical plane. Holding one end of the test specimen in a fixed grip and the other end in a reciprocating grip provides the flexing and unflexing action.
Din Abrasion Tester
My Q Din Abrasion Tester is designed to determine abrasion resistance index of natural
and synthetic rubber in accordance with the above principle. It consists of test specimen holder with a cylindrical Opening adjustable between 15.5 to 16.3 mm to clamp the test specimen with an arrangement to adjust the length of test specimen protruding out
Edge Crush Tester
My Q Edge Crush tester – Digital (ECT) is rugged enough for any production testing environment. It is the ideal testing equipment for paper making, packaging, quality inspection department and more. ECT tester – Digital
(ECT) is a useful equipment for determining the probable compression strength of corrugated and solid fiber board
boxes by testing the paper and paper-board used in making such boxes.
Resistant Insert Flexing Tester
My Q Penetration-Resistant Insert Flexing Tester, also named as Steel Midsole Flexing Tester, is used to test penetration resistant inserts flexing resistance. As described in EN 12568, ISO 20344, the inserts shall exhibit no visible signs of cracking, disintegration or delamination after having been subjected to 1 *106 (one million) flexion cycles.
Flexo meter
My Q flexometer is the internationally-accepted method for the assessment of the flexing endurance of light
leathers and their surface finishes. The tendency for cracks to form in the creases caused by walking can also be determined. The Bally flexer has a different flexing mechanism to the vamp flexer and is complementary to it. It is
also used to precondition samples prior to determining water vapour permeability – particularly in assessing uppers for protective footwear
Footwear Lining Leak proofness Tester
My Q leakproofness testing machine allows a test to be carried out which is specified in a number of European safety footwear standards – for example, EN ISO 20345:2011
(personal protective equipment-safety footwear). The test applies to footwear classified as
Class 2 – with a closed seat region. These are boots defined as either all-rubber (entirely
vulcanised) or all polymeric (entirely moulded)
Heel Fatigue Tester
My Q heel fatigue tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel tip. It is specialized testing heel resistant continuous impact number for female high-heeled shoe, middle-heeled shoes, under a certain energy and frequency, dish blade of the machine continuously beat heel until fatigue breakdown of heels in order to understand the afford ability index of heel to
continuous force, and to determine the durability and quality of heel.
Heel Impact Tester
My Q Heel Impact Tester is used to determine the impact strength of heels of ladies’ shoes, and the result provides an assessment of the liability to failure under the occasional heavy blows received during wear.
Hydrolysis Shoe Testers
My Q Shoes Frosting Hydrolysis Testing Machine is mainly used to detect sole frosting dark rubber of live and shoe material of hydrolysis resistance experiment. Through simulation test various climate humid
combination close condition, testing the product itself to adapt ability whether the characteristic is change. It also can be widely used in electronics, electrical appliances, metal, rubber, plastic, chemical, building
materials, food… Products testing.
IRHD Hardness Tester
My Q IRHD Hardness tester consistent focus on our quality, we are offering a wide range of IRHD Rubber Hardness Tester. This is use to find out the suitability of any rubber component for its intended end use, our professionals use quality tested components and advance technology for manufacturing this hardness tester. Along with that, we are giving this hardness tester after checking properly against diverse quality parameters
Martindale Abrasion Cum Pilling Tester
My Q Martindale Abrasion cum Pilling Tester is designed for checking abrasion as well as
pilling resistance of fabric. Offered tester consists of four testing plates on which abrading
fabrics are attached, cranks, pegs, motor and other components. Provided tester also has a set of weights for proper pressure on test specimens. This tester is widely admired among clients for its
smooth functionality, less maintenance and robust construction. Apart from this, offered Martindale Abrasion cum Pilling Tester is safely packed to prevent damage during transit. This tester finds its usefulness in textile industry
Rebound Resilience Tester
My Q Resilience or the ability to absorb shocks or impact forces and to dampen their effect is one of the major properties
of rubbers. One of the methods used for the determination of impact resilience of solid rubbers is based on the measurement of the height of rebound of a standard plunger after it is dropped from a fixed height onto the surface of the rubber specimen under test. This test is conducted on a Vertical Rebound Resilience Tester.
Ross Flex Tester
My Q Ross Flexing Tester is used to test rubber cut growth resistance under repeated flexing in 90° especially for
shoe sole. This Ross Flexing Tester is suitable to test all types of flexible sheet material. Ross Flex Test Method
Salt Spray Tester
The ability resistance to corrosion of the coating on helmet is determined by means of corrosion resistance test.
It is done by suspending the complete helmet inside an enclosed chamber where they are sprayed with solution of 5 parts of sodium chloride in 95 parts of distilled water (by mass) at room temp. for a
period of 24 hours. After this period, the helmet is washed in running tap water, dried & inspected for signs of corrosion.
Shock Absorption Tester
My Q Shock Absorption Tester (Digital) & Penetration Test is A rigid steel fabricated framework
consisting of heavy metallic base, a hinged metallic black to mount the head frame on, steel w ire guide rapes, which guide the indentor while falling, and means to raise the indentor to the required height and dropping it from that height. The frame is grouted to a concrete block of the required mass and
dimensions. Arrangements are provided on the side of frame for the operator to step up to required height.
Shoe Flex Teste
My Q Shoe Flex Tester simulates the outcomes of actual walking on the shoe. The specimen of test is held strongly at the toe part using an appropriate toe last and clamp, while the heel part has an individual last on which the shoe is strongly tied as in real use
Shoe Heat Resistance Tester
My Q is to test shoe outsole and upper hot contact resistance ability especially for safety shoe. Heat Resistance Test Method includes ISO 20344, SATRA TM49, EN 344 and etc.
Shoe Lace Eyelets Abration Tester
My Q Shoe Lace Eyelets Abrasion Tester is suitable for the abrasion resistance test of all shoelaces and eyelets. The shoelace is bent at a certain angle through the eyelet and
repeatedly pulled under the standard load to achieve the purpose of detecting the abrasion resistance of the shoelace and the shoe eye. Six sets of samples can be tested separately at the same time without mutual interference. This machine is suitable for all types ofshoelace & eyelet.
Shoe Slip Resistance Tester
My Q Footwear Slip Resistance Tester, also called Footwear Friction Tester or Shoe
Dynamic Slip Resistance Tester, is internationally adopted slip resistance tester used to
measure the dynamic coefficient of friction (CoF) of whole shoe sole, forepart or heel, for evaluation of shoe slip resistance. FYI is a leading manufacturer and supplier of high quality footwear slip resistance tester. We offer cost effective testing solutions and
equipment’s for various industrial applications.
Shoe Sole Adhesion Tester
My Q shoe sole adhesion is well-proven instrument is designed to measure the strength of the adhesion of stuck-on and moulded soles at the toe and heel of finished footwear in
the shoe factory, but is equally useful in the testing laboratory.
Shoe Toe Impact Tester
My Q My Has Design a electronic model of Shoe Impact tester. Which will be operated through electric switchs. The toe portion of shoes used industrial applications or used in mines shall be sufficiently rigid so as not to get pressed down beyond a specified limit when a heavy block falls down on it, thus preventing crushing of or injury to the toe of the user.
Shoes Insole Fiber Board Flex Tester
My Q It is used to test the flexing resistance of fiberboards of insole fore parts. The method of Fiberboard flexing tester is to flex the specimen at the angle of 180+/-90 degree at each side, reciprocally under a given load. When specimen fails, the flexing times would be the flexing index of the specimen. And
Fiberboard flexing tester is a good reference for comparing and selecting the material of fiberboards.
Steel Toe Impact Tester
My Q The toe portion of shoes used industrial applications or used in mines shall be sufficiently rigid so as not to get pressed down beyond a specified limit when a heavy block falls down on it, thus
preventing crushing of or injury to the toe of the user. The toes of miner’s safety boots or
industrial shoes are generally reinforced with steel toe cap to provide rigidity to them
Taber Abrasion Tester
Taber abrasion testing machine used to determine the wear resistance of material and assess its wear resistance degree like –measuring its mass loss and transmittance etc. It’s applicable on flat products like –suitcase, carpet, cardboard, clothing, glass, plastic contains, metal coating , paint, decorative sheet, high pressure sheet, plastic textile, floor mats, tile, blankets, electronic components, label, leather, automobile interior decoration, resin, furniture etc
Water Resistance Tester
My Q The uppers of shoes get folded over the toe portion every time a step is taken. These repeated folding cause the
finished grains to start cracking ,resulting in loss of water resistance To ensure that the leather uppers retain their
water resistance for a reasonable period of use, the action of such folding on them is simulated by subjecting test
specimens taken from the leather to a water penetration test using a electrometer.
Water Vapour Permibility Tester
My Q Water vapour permeability of leather is evaluated by clamping a circular test
specimen over the mouth of a bottle containing a solid desiccant and subjecting it to a rapid current of air. The air inside the bottle is circulated in
weight if the desiccant in motion. The increase in weight of the bottle over a specified interval of time gives the quantitative measure of the water vapour permeability of the leather sample under test.
Whole Shoe Flex Tester
My Q Whole Shoes Flexing Tester is used to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexibility resistance or indicating the cracks of shoe or shoe sole through reciprocating
flexing movements under the specified angle and frequency.
Whole Shoe Flex Tester
My Q Whole Shoes Flexing Tester is used to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexibility resistance or indicating the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.